A Homemade cell phone signal booster can make your life easier in so many ways. Let’s discuss why you may need one. People who live in a mobile home/trailer home or in a region that is too far from a cell tower face problems with their cell phone signals. It is very irksome to pay for a monthly cellular phone plan, only to get dropped calls, delayed messages and poor internet service.
Losing signals while travelling seems understandable in some situations. But getting low signals in one’s own home is intolerable.
Signal dropping can literally get on your nerves, especially while taking an important call from work. And let’s not even talk about how disturbing it could be during emergencies.
So, what could be the solution to such an annoying problem? The best solution can be a homemade cell phone signal booster.
Also, for starters, you could buy cell phone signal booster kits, mini-towers, cell phone amplifiers and 4g repeaters that are available commercially. But, buying such equipment could be very expensive and unaffordable.
Your other options include a Do-it-yourself (DIY) guide that can help you to build your own homemade cell phone signal booster from scratch. You can easily make equipment like DIY wifi booster and antenna amplifier and if you are good with technology or at least understand the basics.
Our DIY cell phone signal booster guide can help you to build a cheap homemade cell phone signal amplifier using inexpensive items.
Let’s see how to boost cell signal at home by constructing a homemade cell phone signal booster.
Homemade cell phone signal booster: Here is how to DIY one.
Below are the written instructions of the Do-it-yourself guide for creating a homemade cell phone signal booster.
Before starting the process of setting up the homemade cell phone signal booster, you will require a few materials that will help you to build it properly. You can get the below-mentioned items at any hardware store with ease at a reasonable price.
Step 1: Build an Antenna for homemade cell phone signal booster
Step 2: Link the Coaxial Cable
Step 3: Link the pigtail connector to the antenna
Step 4: Catch the signal
Below are the written instructions for building a DIY cell phone repeater.
Step 1: Create two antennas for indoor and outdoor use for DIY Cell Phone Repeater
Step 2: Setup the Wireless antenna
Step 3: Link antennas with the coaxial cable
You could also use much simpler and short methods to boost your mobile signals at home. The Internal Port Antenna method is one of the easiest methods to improve your cell phone reception.
Below are the written instructions for building a quick and simple cell phone signal booster.
Materials required for DIY Antenna Amplifier
Step 1: Access the internal Port
This method requires you to remove the back cover of your cell phone and access the internal port antenna of the phone.
Step 2: Insert the Cut Out Part
Use a magnet wire that is insulated and remove half an inch of the insulation from one end using a nail shaper. Carefully insert the cut-out part into the antenna port.
Step 3: Put the Tape and Place it Back
Cut the wire to a short length (6.3 inches would be fine) and bend it over. Put the tape on the wire after placing it firmly on the back of the phone.
Step 4: Run the Wire
Run the wire to the top of your cell phone and use it as an antenna extension to get better signal reception.
Creating your own DIY signal boosters could be risky, especially if you have zero experience with tech. Some of the risks involving homemade signal boosters are discussed below.
Every method might not work, which means that you would have to try out different ways to make this work for you. You can try various techniques at your own risk as there is no guarantee that they will still help your cell phone catch signals. The reason could be your cell phone’s model because not all procedures are compatible with every cell phone model.
You would need to be extra careful and conscious about your cell phone’s battery being fully charged at all times to get optimal results from a homemade cell phone signal booster.
A weak battery won’t catch signals properly whereas, using a signal booster drains your battery quickly. In short, it’s a double-edged sword. You would need a full battery to make it work efficiently, while it impacts your battery power immensely.
Your inexperience could lead your cell phone to damage. If you are not confident that you can pull this on your own then, it is strongly recommended that you do not try any of these procedures.
If your homemade cell phone signal booster ends up causing problems in the cellular network, then you might be asked to either verify your own device with the FCC or buy one that they already approve of to avoid network interference.
Benefits of homemade cell phone signal boosters:
Your cell phone reception should considerably improve after setting up a homemade cell phone signal booster. However, if you still struggle to get better signals, then you could always buy a commercial signal booster kit for your convenience.
Seo Title – Homemade cell phone signal booster ideas | DIY cell phone booster homemade
Meta Description – Below we have discussed techniques to make homemade cell phones signal booster. Read along to find the best DIY ideas Dad will help you have the ideal phone connectivity.
Getting a new pet can be complicated. There are always so many things to consider.…
An athlete knows that sport is more than a spectator’s pastime; more than a game,…
In the digital era of instant transactions and a seemingly endless wealth of data to…